4 Simple Step to Hack a Prepaid Electric Meter

All you need is a strong copper wire about 12 Inches depending on the distance between your digital meter and the Fuse inside your meter box. See that wire most probably black from the electric Pole to your house? 

All it does is brings in electricity, The electricity is put into the meter box and fixed into that plastic object where a fuse is placed. Your digital meter then connects to the other end of that plastic object with 2 wires most probably Red and Black. These wires are called “Red=Live, black= Neutral] and another wire Green= Earth is directed in the ground” however your colors might defer.

Ok now all a fuse does is combine the black wire to the meter when placed between the black wire and the digital meter on that Plastic object in the meter box.

All we need to do is bypass this circuit by removing the fuse and replacing it with our own circuit using a strong wire. 

1. Remove at list 2 inches of rubber off each side of your copper wire. 

2. Bend the coper wire so it can move from the fuse to the digital meter.

3. Remove the fuse from the meter box [This will disconnect your electricity]

4. Now you should see the red wire connected to the Plastic object. What you need is to carefully insert one end of the strong wire into the downer section/hole of the plastic object and the other end to a wire mostly red that enters your meter from your house. 

In this trick, you are connecting the red live wire which has electricity direct to the live wire taking electricity in your house without passing through the digital meter that filters and counts your electricity Usage. 

Now you can enjoy free unlimited electricity.